1. Basic information
Requirements for bronzing silicone plate: High temperature resistance 300-400°C, hardness requirements can be determined according to the requirements of customers’ printing patterns. Generally, the hardness is 30A°, 40A°, 50A°, 60A°, 70A°, 80A°, 90A°, etc.
2. Performance
Hot stamping silicone plate is a matching product for hot stamping equipment. It uses a silicone plate as a heat carrier to transfer exquisite patterns to the product. The colors are red, orange, white and black. It has the characteristics of high temperature resistance 300-400 ℃, high pressure resistance, high thermal conductivity, good elasticity and high temperature resistance.
3. What is the gilding press sheet made of
A gilding press sheet is typically made of high-quality silicone material. Silicone is a synthetic polymer that is known for its excellent heat resistance, durability, and flexibility. It is commonly used in various industries due to its desirable properties.
Silicone sheets used for gilding presses are often composed of a solid silicone rubber material. The specific composition and formulation may vary between manufacturers, but it typically consists of silicone polymers, fillers, additives, and curing agents. These components work together to provide the necessary characteristics required for gilding applications.
The silicone material used in the gilding press sheet offers several advantages, such as its ability to withstand high temperatures without deformation or degradation. It is also known for its non-stick properties, which help ensure easy release of the gilding material during the stamping process. Additionally, silicone is generally resistant to tearing, cracking, and chemical damage, making it a reliable choice for gilding press applications.
4. Purpose
It is mainly used in hot stamping fields such as wine bottle caps, plastic discs, plastic cups, cosmetic boxes and other plastic parts and hardware parts. The hot stamping silicone plate plays the role of heat transfer, and the hot stamping paper is printed on the object to be hot stamped through the heat transfer of this product.
5. Kind
There are two types of hot stamping boards: one is made of silicone and aluminum boards pasted together; the other is without aluminum boards, and only silicon is used to produce sheets.
6. Specifications
Width*length*aluminum*glue+degree
300mm width*600mm length*(0.5mm aluminum-30mm aluminum)*(1mm glue-20mm glue)
Support customization, special specifications and thickness can be customized.
7. How to use gilding press 9mm silicon sheet
1. Prepare the Gilding Press: Ensure that the gilding press is clean and in good working condition. Adjust the temperature and pressure settings according to the type of material and foil you are using. Follow the manufacturer’s instructions for setting up the press.
2. Position the Silicone Sheet: Place the 9mm silicone sheet onto the heated platen of the gilding press. The silicone sheet acts as a heat-resistant and flexible surface for the foil stamping process.
3. Position the Foil: Lay the foil onto the area of the material you want to stamp. Make sure the foil is placed precisely, aligned with the design or text you want to transfer.
4. Lower the Press: Close the gilding press to apply pressure. The heated platen and the silicone sheet will press the foil against the material, transferring the foil’s metallic layer onto the surface.
5. Release the Press: After a few seconds (time may vary based on the material and foil type), release the press and lift the silicone sheet to reveal the foiled design.
6. Remove Excess Foil: Gently remove any excess foil around the stamped area using a soft brush or cloth.
7. Finishing Touches: If desired, you can further enhance the stamped design by using a foil finishing pen or other detailing tools.
8. Clean and Store: Clean the gilding press and the silicone sheet after use to ensure their longevity. Store the silicone sheet flat and away from direct sunlight or heat sources.
gilding press silicon sheet manufacturers